Cable mounting trays Promindustriya Series LMG,LMP,KL,LMGZ, etc.

Straight mounting trays are designed for laying straight sections of cable routes. They are used for laying cables with a voltage of up to 1000 V when performing open wiring and open cable laying.

The LMG mounting trays are a non-perforated U-shaped channel.

The LMP mounting trays are a perforated U-shaped channel.

The covers of the KL type trays are designed to prevent foreign objects from entering the wires and cables laid in the LMG, LMP type trays and to ensure the degree of protection IP 20 according to GOST 14254-96.

The LMG mounting trays are a non-perforated U-shaped channel. They have a lateral stiffening rib to strengthen the entire structure and to attach the covers of the KLZ to them "in the lock" of the corresponding size tray.

The LMP mounting trays are a perforated U-shaped channel. They have a lateral stiffening rib to strengthen the entire structure and to attach the covers of the KLZ to them "in the lock" of the corresponding size tray. Perforation is used to connect the trays to each other, to attach conductors to them, as well as to increase heat exchange with the environment.

The covers of the trays of the KLZ type are designed to prevent foreign objects from entering the wires and cables laid in the trays of the LMGZ, LMPZ type and to ensure the degree of protection IP 20 according to GOST 14254-96.

Angle mounting trays CNG, KPP, KSG, KSP, KGGZ, KGPZ, KSGZ, KSPZ are designed to change the direction of cable lines with a voltage of up to 1000 V. It is used for trays of the LMG and LMP type. Corner trays are used to rotate the cable line route by 45°, 90° or 135°. This type of trays is usually connected to straight sections using 8 screw connections. They can be deaf (CNG, KGGZ, KSGZ), have perforations (KPP, KSP, KGPZ, KSPZ) to connect the trays to each other, to attach conductors to them, as well as to increase heat exchange with the environment, and/or a lateral stiffener to strengthen the entire structure and to attach covers to them "in the lock" corresponding to the tray size (KGGZ, KGPZ, KSGZ, KSPZ).

The KMG, KMP cruciform mounting trays are designed for branching wires and cables with a voltage of up to 1000 V of cable lines in a horizontal plane in four directions. It is used for trays of the LMG type.

The mounting tee tray, type OTG (blind) and OTP (perforated) is designed for branching wires and cables with a voltage of up to 1000 V of cable lines in a horizontal plane in three directions. It is used for trays of the LMG and LMP type. They are connected to straight sections by 12 screw connections with M6 thread, no additional connector is required.

Trays of the KMGZ, KMPZ, OTGZ, OTPZ series have a lateral stiffener to strengthen the entire structure and to attach covers to them "in the lock" of the corresponding tray size.

The covers for the trays of the mounting corner KLP, KLS,KLUZ,KLKZ,KLPZ, KLSZ are designed to prevent foreign objects from entering the wires and cables laid in trays of the type of corner mounting cable trays. Covers for mounting corner trays are used to protect the rotation of the cable line route down and up by 45°, 90° or 135° (KLP, KLS). They can be attached "in lock" to a tray of the appropriate size (KLUZ, KLKZ, KLPZ, KLSZ).

Covers for trays of cross-shaped and tee-shaped CLU, CLK, KLT, KLTZ are designed to prevent foreign objects from entering the wires and cables laid in the mounting cable trays. They are used to protect the branching of wires and cables with a voltage of up to 1000 V of cable lines in a horizontal plane in three or four directions. They can be attached "in lock" to a tray of the appropriate size (KLTZ).

Lateral bends, such as OBLG (blind) and OBLP (perforated) are designed for branching a cable line with a voltage of up to 1000 V at an angle of 90 ° in the horizontal plane anywhere in the straight section. They are used for LMG and LMP trays. To obtain side bends of cable runs, it is necessary to cut out the side wall of the tray. They are connected to straight sections by 8 screw connections with M6 thread, no additional connector is required.

Tray covers, such as hoods, are designed to prevent foreign objects from entering wires and cables with a voltage of up to 1000 V, laid in side bends, such as OBLP and OBLG, and to ensure the degree of protection IP 20 according to GOST 14254-96.

• Cable mounting trays. Technical specifications.

Price list

Catalog